TorcUP TXU-32
Low-profile cassette design with a top-mounted hose connection for restricted clearance.
Series illustration. Version and accessories depend on the model.
Your cassette.
Your torque range.
The effective lever arm differs between cassette groups. Each group therefore has its own pressure-to-torque chart.
Select your across-flats size or cassette group.
| Across-flats range | At 69 bar | At 689 bar | Table range |
|---|---|---|---|
| 80–119 mm | 4.707 Nm | 44.603 Nm | 69–689 bar |
| 120–165 mm | 5.212 Nm | 49.382 Nm | 69–689 bar |
| 166–200 mm | 5.884 Nm | 55.753 Nm | 69–689 bar |
The values are for tool selection. Use the individual calibration chart for the specific tool when setting the pressure. Please enquire about standard across-flats sizes and the required version.
The catalogue lists across-flats sizes up to 205 mm. The available torque charts cover sizes up to 200 mm. Separate technical confirmation is required for 201–205 mm.
Source: TXU operating manual, PDF page 17. Weights and dimensions below are model specifications, not confirmed individual values for each across-flats size.
Technical specifications & clearance.
The dimension names refer to the original catalogue drawing. The radius specified there is an edge dimension and must not be treated as the overall outside radius from the bolt centre. Check the complete installation space, including hose routing.
Source: TorcUP TXU catalogue, PDF page 3.
One tool.
A suitable system.
The Uni-Swivel allows flexible hose routing. Across-flats size, cassette group and the complete installation arrangement determine the selection.
We match the pump, hose set, reaction support and accessories to your application.
View hydraulic power units ↗Understand the connection.
Choose the right tool.
The torque, across-flats size and a photo of the installation space are enough to get started.
Advice and related equipment
This specialist website is operated by WSD GmbH. Our main website brings together advice, sales, rental and service for this application.